CoolRoofs

Some things you need to consider about the wiring at home.

Currently, electricity cannot be separated from any activity in the house. So important role, but there are still a lot of users are still lay to the things that should be considered. Electric current cannot be taken lightly. It is not only a matter of electrical input, but the path to the output. In other words, you need to recognize more details about the specification of materials, cable conductivity, and the influence of flow to weather changes.

Check out 5 things you must consider when creating a new electricity grid.

1. Outlet

Note the ideal distance from the outlet point of the floor is between 1-2 meters. Be sure not to overload, one outlet ideally can divided with a T-plug to 4 branching.

2. Cable

Do not just buy the cable, adjust the power delivered. Electrical wiring with copper conductor and PVC insulated permanently installed in your home should be a minimum size of 2.5 mm2, regardless of the amount of electrical power should only be installed and powered up 10A. Use a measuring cable 4mm2 if electric current is between 10A – 16A.

3. Grounding

Grounding on electrical installations are as preventing contact between human with an exposed electrical voltage due to insulation failure. Grounding installed in your house two kinds of electrical installations for home and installation of lightning rods. Two of these grounding system installation and had to be separated is at least 10m. Grounding connections for homes electrical installations installed in kWh meter.

4. Rain and Leaks

Better not make improvements where they have heavy rain or roof leaks, it is closely related to the water as a conductor of electricity, so it is often a short circuit occurs or surge. Also, do not perform repair electrical installations where they have occurred thunder and lightning that were darting.

5. Periodic checks

Perform electrical installation periodically checks using the services of a trusted officer or agency. If in the future there are installation problems, you can call them back to make repairs, or make additions to existing installations.

conductivity, electrical power, electrical voltage, important things, insulation failure